HSK Tool Changer Alignment Gauges

Machine Components Replacement Parts Machine Tool Gauges Everything for HSK

Share |

Click image to enlarge

The tool changer alignment gauge is used to check automatic tool changer positioning between the gripper arm, magazine, and the spindle. Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder. In addition, misclamping and dropped tools can also occur.

The gauge checks axial alignment using pin (1) and radial alignment using pin (2).

Taper								Order Number
HSK-A/E 25								440.135.125.000
HSK-A/E 32								440.135.132.000
HSK-A/E 40								440.135.140.000
HSK-A/E 50								440.135.150.000
HSK-A/E 63								440.135.163.000
HSK-A 80								440.135.180.000
HSK-A 100								440.135.190.000
HSK-A 125								440.135.192.000
HSK-A 160								440.135.196.000

Data Sheet

PDF data sheet: HSK Tool Changer Alignment Gauges (440.100)

Share |

HSK Spindle Runout Test Arbors
Available for HSK-A/C/E 32, 40, 50, 65, 80, 100, 125, 160 and HSK-F 40, 50, 63, 80, 100, 125, 160
Details PDF

ForceCheck Drawbar Clamping Force Gauges
This critical performance -- the tool clamping force -- is often never measured after a machine is put into service. Regular verification allows problems to be detected early...
Details PDF

ForceCheck Wireless Drawbar Force Gauges
The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger...
Details PDF

ForceCheck Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically...
Details PDF

HSK Tool Changer Alignment Gauges

Data Sheet

Related