Tool Holder Taper Check Gauges

• Maximize tool life and spindle life
• Ensure tool holder performance
• Tool holder can be tested with components assembled, and works with retention knob installed
• Includes (A) and (B) indicators with 0.0001" resolution
• Carbide locating pins for long life
• Made with hardened tool steel body
• Comes with master shank (C)

Easy to use

1. Place the master shank (C) into the Taper Check.
2. Adjust the two indicators (A) and (B) so they both read zero with the master shank.
3. Remove the master shank.
4. Place the tool holder to be tested into the Taper Check.
5. Simply take the reading from each indicator and find the difference between the two, (B) • (A), to detect shank wear.

Data Sheet

Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown...
Details PDF

HSK Tool Changer Alignment Gauges
Available for HSK-A 25, 32, 40, 50, 63, 80, 100, 125, and 160
Details PDF

Tool Holder Taper Sleeve Gauges
Available for Steep Taper 30, 40, 45, 50, 55, 60, 65
Details PDF

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed...
Details PDF

Drawbar Stroke Verification Gauges
Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.
Details PDF

Capto Tool Changer Alignment Gauges
Available for Capto C3, C4, C5, C6, C8, C8X, C10
Details PDF

Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
Details PDF

Series 968 HSK Tool Holder Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should...
Details PDF

Features

Easy to use

Data Sheet

Related