Tool Holder Drive Key Tool Taper Gauges

Machine Components Replacement Parts Machine Tool Gauges Everything for HSK

Share |

Measures the size and radius of HSK tool holder drive keys

Click image to enlarge

Click image to enlarge

Complete set with case includes measuring ring with dial indicator, measuring gauge for lower deviation, measuring gauge for upper deviation, mean deviation and setting gauge for dial indicator.

Function

The setting gauge is placed into the gauge ring, and the dial indicator is set to zero. The measuring gauge 1 (second gauge pictured) is then used to measure the lower deviation of the drive key, and the measuring gauge 2 (third gauge) for upper deviation.

Taper								Order Number
HSK-A/C 32								410.240.132.000
HSK-A/C 40								410.240.140.000
HSK-A/C 50								410.240.150.000
HSK-A/C 63								410.240.163.000
HSK-A/C 80								410.240.180.000
HSK-A/C 100								410.240.190.000
HSK-A/C 125								410.240.192.000
HSK-A/C 160								410.240.196.000

Data Sheet

PDF data sheet: Tool Holder Drive Key Tool Taper Gauges (410.240)

Share |

Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown...
Details PDF

Tool Holder Taper Check Gauges
Available for 30, 35, 40, 45, 50 taper tool holders
Details PDF

Tool Holder Taper Sleeve Gauges
Available for Steep Taper 30, 40, 45, 50, 55, 60, 65
Details PDF

Drive Key Spindle Gauges
When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case:...
Details PDF

Pneumatic HSK Tool Holder Gauge Kits
Gauging kit for HSK tool holder taper with pneumatic measuring column. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional...
Details PDF

Drawbar Stroke Verification Gauges
Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.
Details PDF

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed...
Details PDF

Steep Taper Tool Changer Alignment Gauges
Available for Steep Taper 30, 40, 50, and 60
Details PDF

HSK Implementation
Cooperation between machine builder, tool holder manufacturer, and end-user assures process quality.
Details PDF