Steep Taper Tool Changer Alignment Gauges

Click image to enlarge

The tool changer alignment gauge is used to check automatic tool changer positioning between the gripper arm, magazine, and the spindle. Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder. In addition, mis-clamping and dropped tools can also occur.

The gauge checks axial alignment using pin (1).

Taper

Order Number

Steep Taper 30 (BT) Tool Changer Alignment Gauge

440.135.730.000

Steep Taper 40 (BT) Tool Changer Alignment Gauge

440.135.740.000

Steep Taper 50 (BT) Tool Changer Alignment Gauge

440.135.750.000

Steep Taper 30 (DIN) Tool Changer Alignment Gauge

440.135.830.000

Steep Taper 40 (DIN) Tool Changer Alignment Gauge

440.135.840.000

Steep Taper 50 (DIN) Tool Changer Alignment Gauge

440.135.850.000

Steep Taper 60 (DIN) Tool Changer Alignment Gauge

440.135.860.000

Steep Taper 30 (CAT/ANSI) Tool Changer Alignment Gauge

440.135.930.000

Steep Taper 40 (CAT/ANSI) Tool Changer Alignment Gauge

440.135.940.000

Steep Taper 50 (CAT/ANSI) Tool Changer Alignment Gauge

440.135.950.000

Steep Taper 60 (CAT/ANSI) Tool Changer Alignment Gauge

440.135.960.000

Data Sheet

Steep Taper Tool Changer Alignment Gauge Instruction Manual
The tool changer alignment gauge is designed to verify correct alignment of the machine spindle to the tool changer. The gauge consists of three pieces as shown in the diagram....
Details PDF

Steep Taper Spindle Runout Test Arbors
Runout tolerance 0.003 mm / 3 micron / 0.0001 inch. 1 micron arbors available; please contact us.
Details PDF

ForceCheck Drawbar Clamping Force Gauges
This critical performance -- the tool clamping force -- is often never measured after a machine is put into service. Regular verification allows problems to be detected early...
Details PDF

ForceCheck Wireless Drawbar Force Gauges
The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger...
Details PDF

ForceCheck Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically...
Details PDF

Steep Taper Tool Changer Alignment Gauges

Data Sheet

Related