Header Transatlantic Connection
SEARCH  

Tel. 815 962 4500  •  Contact Us  •  Sitemap

Machine Components Machine Components Machine Parts Replacement Parts Machine Tool Gauges Machine Tool Gauges HSK Taper Products Everything for HSK

Contact Us
Tel. 815 962-4500
Share |

Series 978 HSK 30 Degree Clamping Angle Gauges

Series 978 HSK 30 Degree Clamping Angle Gauges Diagram
Click image to enlarge

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface.

• Calibration on request
• Includes calibrated setting gauge and measuring instructions
• Supplied in wooden case with inspection protocol

Taper d1 l1 Order Number
HSK 25 15 7.21 410.231.125.000
HSK 32 19 8.92 410.231.132.000
HSK 40 23 11.42 410.231.140.000
HSK 50 29 14.13 410.231.150.000
HSK 63 37 18.13 410.231.163.000
HSK 80 46 22.85 410.231.180.000
HSK 100 58 28.56 410.231.190.000

Data Sheet

PDF data sheet: Series 978 HSK 30 Degree Clamping Angle Gauges (410.231)

Share |

Related

Tool Racks Model M8S

Tool Racks Model M8S
To accommodate 8 tool carriers in two rows (4 tool carriers per row), arranged at a 35 degree angle.
Details PDF

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed...
Details PDF

Tool Racks Model 8

Tool Racks Model 8
To accommodate 8 tool carriers in two rows (4 tool carriers per row), arranged at a 35 degree angle. Used as a table model or as a standing model with an underframe.
Details PDF

BERG Steep Taper Grippers SSK

BERG Steep Taper Grippers SSK
BERG Spanntechnik SSK series grippers are known worldwide for trouble-free operation. Available for CAT/ANSI, DIN, MAS/BT/JIS, and ISO.

SSKS grippers are dimensionally...
Details PDF

BERG SPH-V Pallet Clamping Heads

BERG SPH-V Pallet Clamping Heads
Clamping heads of the series SPH-V are principally used in machining centers for vertical pallet clamping. The series SPH-V is based on the basic principle of the SPH. The...
Details PDF

BERG Pallet Clamping Force Gauges

BERG Pallet Clamping Force Gauges
Includes measuring case, display unit, measuring cartridge, test certificate, and clamping head specific pull studs
Details PDF

Drive Key Spindle Gauges

Drive Key Spindle Gauges
When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case:...
Details PDF

BERG SPM-HV Pallet Clamping Heads

BERG SPM-HV Pallet Clamping Heads
Clamping heads of the SPM-HV series are used for pallet clamping on single or double axis indexing tables. With the clamping heads and attendant tapered rings, maximum repeat...
Details PDF

Dial Indicator Tool Taper Gauges

Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown...
Details PDF