Drive Key Spindle Gauges

Machine Components Replacement Parts Machine Tool Gauges Everything for HSK

Share |

Measuring HSK spindle drive keys and radius

Click image to enlarge

Two measuring gauges in storage case: "go" and "no go" plug gauges.

Note: center deviation of b1 (0.05 mm) is not measured.

Function

When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face.

Taper	r1±0.025	b1±0.05	e1	e2	Order Number
HSK-A 32	1.5	6.8	8.905	4.903	410.330.132.000
HSK-A 40	2.0	7.8	11.081	5.903	410.330.140.000
HSK-A 50	2.5	10.3	13.997	7.648	410.330.150.000
HSK-A 63	3.0	12.3	18.110	9.150	410.330.163.000
HSK-A 80	4.0	15.8	22.073	11.898	410.330.180.000
HSK-A 100	5.8	19.78	27.561	14.888	410.330.190.000
HSK-A 125	6.0	24.78	35.580	18.388	410.330.192.000
HSK-A 160	8.0	29.78	44.538	22.888	410.330.196.000

Data Sheet

PDF data sheet: Drive Key Spindle Gauges (410.330)

Share |

Spindle Runout Arbor Carrying Cases
Whether your gauges need to be transported on a frequent basis, or need to be stored in one area for a period of time, we can offer a reliable solution.
Details PDF

Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
Details PDF

Tool Taper Cleaning Machines
Keep precision at the spindle interface by keeping tool holders clean: The required cleaning unit is simply placed on the drive unit and the taper cleaning device is immediately...
Details PDF

Steep Taper Spindle Plug Gauges
Available for Steep Taper 30, 40, 45, 50, 55, 60, 65
Details PDF

CBN Hydrostatic Grinding Spindle Systems
This is an example of a hydrostatic spindle designed for high speed grinding with CBN grinding wheels. The small bearing diameter in combination with high surface speed allows...
Details PDF

Steep Taper Tool Changer Alignment Gauge Instruction Manual
The tool changer alignment gauge is designed to verify correct alignment of the machine spindle to the tool changer. The gauge consists of three pieces as shown in the diagram....
Details PDF

Kelch HSK-A Shell End Mill Arbors for Milling Cutters with Longitudinal Slot or Tenon Drive
Available for HSK-A 40, 50, 63, 80, 100
Details PDF

HSK Implementation
Cooperation between machine builder, tool holder manufacturer, and end-user assures process quality.
Details PDF

Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown...
Details PDF