Dial Indicator Spindle Taper Gauges

For the periodic verification of the taper of HSK spindles per DIN 69063

Click image to enlarge

Click image to enlarge

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.

Complete set in wooden case, including taper plug gauge, setting ring, dial indicator (scale 0.001 mm), and certificate.

Note: The groove of the flat contact surface of the setting ring (0.10 mm depth) is necessary for checking plus deviation of the HSK spindle taper.

Function

The dimension I 2 (per DIN 69 063) in connection with the taper diameter d2 is set to 0 with the setting ring. The HSK spindle to be measured can be compared with the data from the plug gauge and dial indicator.

Data Sheet

PDF data sheet: Dial Indicator Spindle Taper Gauges (410.310)

Related