Capto Tool Changer Alignment Gauges

Machine Components Replacement Parts Machine Tool Gauges Everything for HSK

Share |

Click image to enlarge

The tool changer alignment tool is used to check automatic tool changer positioning between the gripper arm, magazine, and the spindle. Improper alignment can result in abnormal wear on the spindle interface, mis-clamping, dropped tools, etc. The tool checks axial alignment using pin (1) and radial alignment using pin (2).

The tool checks axial alignment using pin (1) and radial alignment using pin (2).

Taper								Order Number
Capto C3								440.110.C03.000
Capto C4								440.110.C04.000
Capto C5								440.110.C05.000
Capto C6								440.110.C06.000
Capto C8								440.110.C08.000
Capto C8X								440.110.C08X.000
Capto C10								440.110.C10.000

Data Sheet

PDF data sheet: Capto Tool Changer Alignment Gauges (440.C00)

Share |

Capto Spindle Runout Test Arbors
Available for Capto C3, C4, C5, C6, C8, and C10
Details PDF

ForceCheck Drawbar Clamping Force Gauges
This critical performance -- the tool clamping force -- is often never measured after a machine is put into service. Regular verification allows problems to be detected early...
Details PDF

ForceCheck Wireless Drawbar Force Gauges
The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger...
Details PDF

ForceCheck Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically...
Details PDF

Capto Tool Changer Alignment Gauges

Data Sheet

Related