KS Assembly Keys

Used for locking and releasing or dismantling KS clamping cartridges (standard and high pressure clamping cartridges). The assembly gripper makes insertion and removal of the clamping grippers, even on multi-spindle heads, an easy operation.

Note

Locking and releasing of the clamping cartridge is made easier by using an extension piece which is inserted into hole D3.

Extension piece not included.

Data Sheet

KS Assembly Spanners
Available for HSK-C 32, 40, 50, 63, 80, 100. Also available MLC-cartridges for HSK-C 40, 50, 63, 80, 100.
Details PDF

Steep Taper Tool Changer Alignment Gauge Instruction Manual
The tool changer alignment gauge is designed to verify correct alignment of the machine spindle to the tool changer. The gauge consists of three pieces as shown in the diagram....
Details PDF

Roehrs Tube Couplers
Tube coupler for high-speed assembly of fiber glass strengthened plastic tubes in very high pressure ranges.
Details PDF

Roehrs Helical Disk Springs
With our patented helical disk spring, Roehrs can offer our customers a proven and tested machine component, which in many cases replaces the common multi-layer disc spring...
Details PDF

Drive Key Spindle Gauges
When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case:...
Details PDF

Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
Details PDF

BERG HSK Grippers HSS and HSSL
The BERG Spanntechnik HSS gripper has been replaced by the HK and HKR. Replacement grippers are available for existing machines.
Details PDF

HSK Pressure Ball Screws
For brass locking rings. Minimum order quantity of 5.
Details PDF

Note

Data Sheet

Related