Click image to enlarge

Application: Hydrostatic Rotary Tables
The world's largest gear and profile grinding machines use hydrostatic bearings.
Details PDF

Hydrostatic Leadscrews
- Speed comparable to a linear motor
- Very low friction when machining, virtually frictionless
during positioning
- Steps in the 0.1 micron range are...
Details PDF

CBN Hydrostatic Grinding Spindle Systems
This is an example of a hydrostatic spindle designed for high speed grinding with CBN grinding wheels. The small bearing diameter in combination with high surface speed allows...
Details PDF

Hydrostatic Linear Motor Guide
The PM Flow Controller makes it possible for machine builders to easily integrate custom hydrostatic systems into both new and existing machines.
Details PDF

Hydrostatic Application Worksheet
Download the PDF data sheet for the Hydrostatic Application Worksheet
Details PDF

BERG Rotary Transmission Leadthroughs HDF
Rotary transmission leadthroughs serve as a rear inter face for fluid transmission into the spindle. A hydromechanic clamping unit or integrated clamping cylinder can be actuated...
Details PDF

BERG SPM-HV Pallet Clamping Heads
Clamping heads of the SPM-HV series are used for pallet clamping on single or double axis indexing tables. With the clamping heads and attendant tapered rings, maximum repeat...
Details PDF

Hydrostatic Slides
- Very low friction, no friction at positioning
- Movement of 0.1 micro-m possible
- No reversal backlash of friction force

Details PDF

Hydrostatic Center Bearings
- Only one radial bearing
- Moment and axial forces are carried by an axial bearing
- Integrated clamping piston and rotating oil union for a hydraulic collet....
Details PDF