No additional space required thanks to the possibility of positioning the Immersion Re-Cooler onto the oil or liquid container. Large-surface evaporator made of standard steel or stainless steel 1.4301. Condenser extremely dirt-resistant. Owing to an approximately 5 times larger surface than the surface of the corresponding Continuous Cooling Plant, this equipment offers a high transmission value and efficiency even if the flow speed is low. Additional storage capacity for peak loads thanks to the condenser’s direct contact with the liquid in the container. Transport eyelets are provided as a standard accessory for lifting up the complete power unit for the cleansing of the container and the condenser. Lining of the cooling power unit with the air outlet pointing to the top. Available upon request with an air filter installed at the air intake upstream of the condenser. Control automatics include control fuses, main fuses, main switch, control transformer, control switch, control lamps and an electronic temperature controller or a differential controller relative to room temperature.
Available upon request with customized container including a filter installed on top of it, pumps and an additional heating equipment. As a special design also available for ice accumulation equipment or aggressive media. High quality and solid design guaranteed by 25 years of experience in refrigeration technology. Reliable customer service thanks to approx. 80 customer service agencies in the FRG and representatives in Europe and overseas. All power units also available with a water-cooled condenser. As a special design also available with a Continuous Cooler (multi-circuit cooling plant DU ET).
BKW Kuma Automatic Filter Devices
The soiled cooling lubricant is conveyed onto the non-woven filter lying in a cavity, via a liquid feed distributor. Owing to the gravitational force the coolant flows through... DetailsPDF
BKW Kuma Hydrocyclones
Hydrocyclone Cooling Lubricant – cleaning systems operate in all applications where heavy dirt particles are to be separated from low viscous liquids – e.g. on machine tools... DetailsPDF
BKW Cooling Filtration Systems
Cooling Filtration Systems are designed for automatic purification cleaning and temperature equilibration of cooling lubricants. They are used in honing, grinding and glass... DetailsPDF
BKW Water Re-Coolers
Including a fully hermetical cooling agent compressor for the cooling of clean water, glycol mix or emulsion. A powerful water pump (WRK30-100 made of stainless steel), a... DetailsPDF
BKW Kuma Internal Bed Filters
This type of filter can be used in all treatments where small chips and fine particles are to be filtered out of liquids even if these are of a rather high viscosity. This... DetailsPDF
BKW Control Cabinet Coolers
Electronic control systems are prone to malfunctions if exposed to high temperatures. The cooling is often performed by the blowing-in of external air or via indirect air/air... DetailsPDF
Haimer Power Clamp Shower Coolers
For rapid cooling of tools. Add-on for all shrink fit machines.
- Suitable for all contours
- Drying by rotating air nozzles
- Supplementing existing... DetailsPDF
Oswald MF Synchronous Motors
Liquid-cooled OSWALD synchronous motors and generators series M are particularly suitable when heavy demands are placed on a drive system. The motors are designed for wide... DetailsPDF
· Contact Us
· Sitemap
Machine Components
Replacement Parts
Machine Tool Gauges
Everything for HSK
PDF data sheet: BKW Immersion Liquid Re-Coolers (230.201)
