BKW Heat Exchangers

These cooling systems facilitate the cooling of oils and other media (with BKW equipment even contaminated media). Water is supplied at the front inlet side from the internal side of the tubes while the medium to be cooled flows in from the jacket.

Data Sheet

BKW Control Cabinet Coolers
Electronic control systems are prone to malfunctions if exposed to high temperatures. The cooling is often performed by the blowing-in of external air or via indirect air/air...
Details PDF

Guhring HSK-E Heat Shrink Fit Chucks
- Balancing quality G6.3 / 15,000 rpm.
- For tool shank tolerance h6
Details PDF

Guhring HSK-C Heat Shrink Fit Chucks
- Balancing quality G6.3 / 15,000 rpm
- For tool shank tolerance h6
- To DIN 69882-8
- Special dimensions on request
Details PDF

Haimer Power Clamp Economic Plus EG Heat Shrink Systems
Single chuck system with cooling, without rotary table, tool tray optional.
Details PDF

Guhring MQL HSK-A Heat Shrink Fit Chucks for Manual Tool Change
- New MQL standard, l2 is plug-in depth at DIN 6535
- For 1-channel systems
- Balancing quality: G 6.3 / 15,000 rpm
- For shank tolerance h6

Details PDF

Guhring MQL HSK-A Heat Shrink Fit Chucks for Automatic Tool Change
- New MQL standard
- l2 plug-depth at DIN 6535
- For 1-channel systems
- Balancing quality G6.3 / 15,000 rpm.
- For shank tolerance h6
Details PDF

Guhring HSK-A Heat Shrink Fit Chucks
- Balancing quality G6.3 at 15,000 rpm
- MQL suitable
- For tool shank tolerance h6
- To DIN 69882-8
Details PDF

Haimer Power Clamp Economic NG Heat Shrink Systems
High performance shrink fit machine for all tools.
- With intelligent NG coil
- Single chuck version
- Without cooling
Details PDF

Data Sheet

Related