Electromechanical Clamping System Bellcrank Lever Style
The electro-mechanical, self-locking die clamping system PSP ...VLE/PSV/AS-I is designed for clamping dies of different widths on press slides. The clamping systems are controlled decentrally and individually in each clamping system. Each local clamp control system communicates with the forming machine control system via the AS-I BUS. The clamping actuator automatically moves into the T-groove of the press slide between the park position and the respective die. The electro-mechanical clamping system clamps the die and switches off automatically on reaching the clamping force.
PSP ... VL / PLV
Electromechanical Clamping System Bellcrank Lever Style
Electromechanical PSP...VL/PLV Clamp for die clamping on slides. The clamp automatically travels between the park position and the actual die, guided by the T-slot of the slide. The bell-crank lever covers a wide clamping range.
PSP ... VK / PLV
Electromechanical Clamping System Wedgebar Style
Electromechanical PSP...VK/PLV Clamp for die clamping on slides. The clamp automatically travels between the park position and the actual die, guided by the T-slot of the slide. In park position the clamp is safety locked by the wedge jaw.
PSP ... E / PSV / AS-I
Electromechanical Clamping System Drawbar Style
The electro-mechanical, self-locking PSP...E/PSV/AS-I is designed for clamping dies of different widths with clamping slot on press slides. The clamping systems are controlled decentrally and individually in each clamping system. Each local clamp control system communicates with the forming machine control system via the AS-I BUS. The clamping actuator automatically moves into the T-slot of the press slide between the park position and the respective die. The electro-mechanical clamping system clamps the die and switches off automatically on reaching the clamping force.
BKZ ... / PSV (AS-I)
Hydraulic Clamping System Drawbar Style
The hydraulic die clamping system BKZ./PSV is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Hydraulic pressure is in maximum 400 bar / option 245bar version. The BUS controlled version BKZ.../PSV/AS-I with AS interface is available as an alternative.
BKZ ... D / PSV (AS-I)
Hydraulic Clamping System Drawbar Style
The hydraulic die clamping system BKZ ...D/PSV is designed for clamping dies of different widths on press slides. The clamping drive moves automatically into the T-slot of the press plunger between the park position and the respective die. The clamping element can clamp different clamping rim heights due to the long clamping stroke of the double acting cylinder. The clamping pressure is 400 bar. The BUS controlled version BKZ ...D/PSV/AS-I with AS interface is available as alternative.
BKZ C ... / PSV (AS-I)
Hydraulic C-Clamping System
The hydraulic die clamping system BKZ C./PSV is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Hydraulic pressure is in maximum 400 bar. The BUS controlled version BKZ C.../PSV/AS-I with AS interface is available as an alternative.
BKZ ... / PKV
The Clamping Actuator with Push Pull Chain
The hydraulic die clamping system BKZ./PKV is designed for clamping dies of various widths on press slides. The push pull chain actuator moves automatically in the T-slot of the press slide between the park position and the respective die. The push pull chain actuator can be used alternative to the PSV/PLV clamping actuator for every Berg clamping system.
PSP ... T / PSV (AS-I)
Mechanical Clamping System Disk Spring Washer Style
The mechanical die clamping system PSP...T/PSV is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Clamping is performed by Belleville spring washers; hydraulic unclamping. The BUS controlled version PSP...T/AS-I with AS interface is available as an alternative.
Hydrolock ... / PSV (AS-I)
Hydromechanical Clamping System Drawbar Style
The hydromechanical selflocking die clamping system Hydrolock .../PSV is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Clamping and unclamping are performed by a hydromechanical selflocking clamping gear. Hydraulic pressure is in maximum 90 bar. The BUS controlled version Hydrolock...PSV/AS-I with AS interface is available as an alternative.
Hydrolock C ... / PSV (AS-I)
Hydromechanical C-Clamping System selflocking
The hydromechanical selflocking die clamping system Hydrolock C.../PSV is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the park position and the respective die. Clamping and unclamping are performed by a hydromechanical selflocking clamping gear. Hydraulic pressure is in maximum 90 bar. The BUS controlled version Hydrolock C.../PSV/AS-I with AS interface is available as an alternative.
BERG Workpiece Holding Clamping Systems
BERG-Spanntechnik offers an extensive range of power operated chucks and hydraulic cylinders which meet all the requirements of modern CNC lathes as there are effective clamping... DetailsPDF
BERG HSK Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for HSK tools developed by BERG Spanntechnik is used in conjunction with the proven HSH clamping sets. In this solution the wedge drive itself... DetailsPDF
· Contact Us
· Sitemap
Machine Components
Replacement Parts
Machine Tool Gauges
Everything for HSK
PDF data sheet: BERG Self-Traveling Clamping Systems (293-PV)
