Application:
Tapered rings are intended for attachment to pallets, workpiece holders or devices. In conjunction with clamping bolts and the attendant clamping heads, they serve to clamp the machine elements shown above. In combination with the clamping heads, maximum repeat precision of the clamping position is achieved.
Design Features:
The tapered rings are designed according to the geometry and clamping forces of the assigned clamping heads. The conical surfaces with a hardness greater than 60 HRC and the special hardness depth are insensitive to any type of soiling.
Pull Studs (Accessories)
Application:
Pull studs are intended to be screwed into pallets, workpiece holders or devices. In conjunction with tapered rings and the attendant clamping heads, they serve to clamp the machine elements shown above.
Design Features:
The clamping bolts are designed according to the clamping forces of the assigned clamping heads. Their surface qualities, hardness and mechanical strength properties meet the values specified in the tool standards.
BERG SPH Pallet Clamping Heads
Clamping heads of the series SPH are principally used in machining centers for horizontal pallet clamping. With these clamping heads and the attendant tapered rings it is... DetailsPDF
BERG SPH-V Pallet Clamping Heads
Clamping heads of the series SPH-V are principally used in machining centers for vertical pallet clamping. The series SPH-V is based on the basic principle of the SPH. The... DetailsPDF
BERG SPM-HV Pallet Clamping Heads
Clamping heads of the SPM-HV series are used for pallet clamping on single or double axis indexing tables. With the clamping heads and attendant tapered rings, maximum repeat... DetailsPDF
· Contact Us
· Sitemap
Machine Components
Replacement Parts
Machine Tool Gauges
Everything for HSK
PDF data sheet: BERG Pallet Clamping Head Accessories (292-PCHACC)
