BERG Drawbar Force Gauges

The BERG clamping force measuring system for the tool holders is designed for force measurement when the spindle is stationary! The measuring system consists of a handy sturdy display device in pocket calculator format and the measuring equipment required for the various application. The measured data can be transferred to any WIN 9x/NT PC via a serial standard inter face and represented in y/t. The measuring system includes a practical case for accommodating the display device, the measuring equipment, the charger and the connecting cable.

Sensing Device M-SK

The sensing devices M-SK measure the clamping forces in steep taper (SK) following DIN 6987/1, ISO 7388/1. The standard handheld display supports all different sensing cartridges. It needs just to fit the correct pull stud into the cartridge corresponding to the different standards (DIN, ANSI, JIS, MAS). Steep taper standards away from the DIN 6987/1, ISO 7388/1 may need special adapting pull studs.

Sensing Device M-HSK

The sensing devices M-HSK measure the clamping forces in hollow shaft tool holders (HSK) following DIN 69839. The standard handheld display supports all different
sensing cartridges.

Sensing Device M-Capto

The sensing devices M-Capto measure the clamping forces in Coromant Capto tool holders. The standard handheld display supports all different sensing cartridges.

Data Sheet

ForceCheck Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically...
Details PDF

ForceCheck Drawbar Clamping Force Gauges
This critical performance -- the tool clamping force -- is often never measured after a machine is put into service. Regular verification allows problems to be detected early...
Details PDF

Custom Heavy Duty Case Services
TAC Rockford can custom-design a ultra-heavy-duty Pelican case to store your gauges. A custom foam insert can hold just a runout arbor, or all of your gauges together -- runout...
Details PDF

ForceCheck Wireless Drawbar Force Gauges
The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger...
Details PDF

ForceCheck Drawbar Clamping Measuring Bars
This critical performance -- the tool clamping force -- is often never measured after a machine is put into service. Regular verification allows problems to be detected early...
Details PDF

Custom-Built Machine Gauges
We can build custom gauges for any machine or machine designed specifically for any application and requirements -- even gauges not designed or built by anyone else! Interface...
Details PDF

ForceCheck Collet Force Gauges
With the ForceCheck collet force gauge, the clamping forces on collets and hydraulic tool holders can be measured to obtain accurate machining specifications while fulfilling...
Details PDF

BERG HSK Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for HSK tools developed by BERG Spanntechnik is used in conjunction with the proven HSH clamping sets. In this solution the wedge drive itself...
Details PDF

Sensing Device M-SK

Sensing Device M-HSK

Sensing Device M-Capto

Data Sheet

Related