BERG Drawbar Adapters

Depending on the customer's requirements one or more media can be transmitted from the end of the spindle (actuation and/or rotary supply to the front HSK, SSK or Coromant Capto interface.

Design Features

The concentric transmission of the coolant can be separated from the off-centre transmission of the bleeding or control air by using the connector designed as a control slide valve or by closing the air channel by way of non-return valves. The selection and design of the medium transfer to the tool interface should always be considered in conjunction with the rear medium supply.

Ordering Example

Connectors are offered as spindle equipment in a complete unit including draw-bar, spring stack and rear actuation in combination with an attendant gripper set.

Data Sheet

BERG HSK Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for HSK tools developed by BERG Spanntechnik is used in conjunction with the proven HSH clamping sets. In this solution the wedge drive itself...
Details PDF

BERG Capto Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for Coromant Capto tools developed by BERG Spanntechnik is used in conjunction with Coromant Capto clamping sets. In this solution the wedge...
Details PDF

BERG Steep Taper Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for quick-release taper tools developed by BERG Spanntechnik is used in conjunction with the proven SSK clamping sets. In this solution the...
Details PDF

ForceCheck Drawbar Clamping Measuring Bars
This critical performance -- the tool clamping force -- is often never measured after a machine is put into service. Regular verification allows problems to be detected early...
Details PDF

ForceCheck Drawbar Clamping Force Gauges
This critical performance -- the tool clamping force -- is often never measured after a machine is put into service. Regular verification allows problems to be detected early...
Details PDF

ForceCheck Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically...
Details PDF

ForceCheck Wireless Drawbar Force Gauges
The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger...
Details PDF

Drawbar Stroke Verification Gauges
Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.
Details PDF

Application

Design Features

Ordering Example

Data Sheet

Related